Home / Type N Series Connectors

Type N Series Connectors

TYPE N SERIES CONNECTORS

Weatherproof, medium-size RF connector for use with coaxial cables.

Thank you for contacting Nemal Electronics! We'll be in touch soon.
This field is required
This field is required
This field is required
This field is required
This field is required

RF AND MICROWAVE

We design and manufacture RF solutions for broadcast and wireless networks.

Thank you for contacting Nemal Electronics! We'll be in touch soon.
This field is required
This field is required
This field is required
This field is required
This field is required

In addition to our large inventory of standard products, we can design and manufacture Type N connectors, adapters, and cable assemblies to your project's specific requirements in either prototype or production quantities. You can purchase the more common varieties on our website or contact us by filling out the form on this page or by giving us a call at (800) 522-2253.

Type N Series Connectors

N series RF Connectors are high quality connectors of intermediate size operable from DC to 11GHz. They have a 5/8-24 NEF-2 threaded coupling, which insures a low noise level and the ability to withstand shock and vibration. The standard nominal impedance of N series Connectors is 50 ohms. There is a sub-group which has a 70-ohm nominal impedance, designated in the Complete Listing as 70fl mating. These two groups are not intermateable.

N series Connectors are available for coaxial cables of the RG-/U series ranging in size from 5/64" (RG-196/U) to 7/8" (RG-218/U) and for many special purpose and proprietary cables within this size range. Type-N Connectors are used in a wide range of applications including cellular, military and aerospace, cable assemblies, instrumentation, antennas, microwave, surge protection WLAN and telecommunications. These connectors conform to the MIL-C-39012 specification and can accommodate a wide range of coaxial cables.

Check out the charts below for more specific Type N Connectors technical data.

TYPE N SERIES PLUGS

Cable Group Nemal P/N Dimensions (IN) Tooling Notes

RG 5, 6, 21, 143, 212

UG 18C

1.50

0.78

-

-

RG 8, 9, 213, 214, 225

UG 21B

UG 21D

UG 594B

UG 1185

1.81

0.78

1.50

0.78

1.38

1.72

1.52

0.78

-

-

-

-

-

-

Angle

Captivated

RG 8, 213

NE 7002

NE 702

NE 7084

1.32

0.78

1.32

0.78

1.34

2.14

13

-

13

Crimp

Twist-on

Angle

RG 8X

NE 708

NE 710

1.50

1.25

0.78

0.72

-

59

-

Crimp

RG 9, 214

NE 7010

1.32

0.78

14

Crimp

RG 9, 214, 225, 393

NE 7030

1.34

2.14

14

Angle-Crimp

RG 11

UG 94A

1.83

0.78

-

70 Ohm

RG 14, 217

UG 204C

1.67

0.88

-

-

RG 17, 218

UG 167F

2.18

1.31

-

-

RG 55, 58, 141, 142, 223, 303, 400

UG 536B

NE 7040

1.40

0.78

1.37

1.21

-

-

-

Angle

RG 55, 142, 223, 400

NE 7050

NE 7070

1.50

0.78

1.30

0.78

58

58

Crimp

Angle-Crimp

RG 58, 141

NE 7082

NE 7092

1.30

1.66

1.44

0.78

58

58

Angle-Crimp

Crimp

RG 59, 62, 71, 140, 210

UG 603A

NE 7098

1.38

0.78

1.30

0.51

-

-

-

75 Ohm

RG 59, 62, 210

NE 7094

1.49

0.78

59

Crimp+Clamp

RG 115A

NE 7096

1.52

0.78

14

Captivated-Crimp

RG 215

UG 941B

2.06

0.78

-

-

Belden 9913, 8214, RG8 (11 AWG.) NEMAL 1102

NE 720

NE 7022

NE 7021

1.50

0.78

1.44

0.78

1.81

0.78

-

13

-

-

Crimp

Long Bidy-Gold Contact

Belden 8281

NE 7029

1.50

0.78

-

-

1/2  Superflexible

NE 7060

1.50

0.78

-

-

1/4 Superflexible

NE 7086

1.50

0.78

-

-

Ethernet Belden 9880

NE 7004

1.50

0.78

14

Crimp

Proflex™

NE 700

1.25

0.72

59

Crimp

Semi-Rigid 141 RG 402

NE 790

1.30

0.78

-

-

Semi-Rigid 250 RG 401

NE 7090

1.30

0.78

-

-

Receptacles

Nemal P/N Dimesions (IN) Notes

NE 730

1.10

0.78

Male-Panel Mount

NE 755

1.25

0.70

Panel Mount Small Flange WW

UG 58A

1.12

1.00

Panel Mount

UG 680A

1.61

0.81

Pressurized Bulkhead Mount

Jacks

Cable Group Nemal P/N Dimensions (IN) Tooling Notes

RG 5, 6, 21, 143, 212

UG 20D

1.56

0.75

-

-

RG 8, 9, 213, 214

UG 23D

1.56

0.75

-

-

UG 1186

UG 22B

UG 160C

1.56

0.75

1.56

1.00

1.75

0.88

-

-

-

Captived

Panel Mount

Bulkhead Mount

RG 8, 213

NE 7102

NE 7118

1.40

1.61

0.63

1.00

13

13

Crimp

Panel Mount Crimp

RG 9, 214

NE 7110

NE 7114

NE 7116

1.82

0.88

1.40

0.63

1.61

1.00

14

14

14

Bulkhead Mount Crimp

Crimp

Panel Mount Crimp

RG 11 - 70ohm only

UG 95A

1.56

75

-

70 ohm

RG 58, 141

NE 7106

1.40

0.63

58

Crimp

RG 142, 223, 400

NE 7108

NE 7120

1.75

0.88

1.58

1.00

42

42

Bulk Mount Crimp

Panel Mount Crimp

RG 115A

NE 7112

1.59

0.75

14

Crimp

.141 Semi-Rigid

NE 7195

NE 7104

NE 7193

1.56

0.75

1.56

1.00

1.82

0.88

-

-

-

-

Panel Mount

Bulkhead Mount

RG 174, 179, 188, 316

NE 7135

1.82

0.88

-

Bulkhead Mount

RG 55, 58, 141, 142, 223, 400

NE 7140

UG 556B

UG 1095A

1.31

0.63

1.68

0.92

1.42

0.66

-

-

-

-

Bulkhead Mount

Panel Mount

RG 59, 62

UG 602A

1.41

63

-

-

Belden 9913, 8214, NEMAL 1181F

NE 723

1.56

0.75

-

-

In Series Adapters

Nemal P/N For QPL Requirements, Use P/N Dimensions (IN) Notes

NE 7330

* 75 Ohm*

1.50

0.65

Female-Female 75 Ohm

NE 7320

-

1.75

0.81

Panel Feedthru

NE 7310

-

1.29

1.29

Female-Female Elbow

NE 750

-

1.37

1.37

Male-Male Elbow

UG 27C

M 55339/03-000027

1.32

1.37

Male-Female Elbow

UG 28A

M 55339/06-000028

1.75

1.22

“T” 3 Female

UG 29B

M 55339/07-000029

1.75

0.63

Female-Female

UG 30D

M 55339/04-000030

1.79

0.75

Bulkhead Feedthru

UG 30-75

*75 Ohm*

1.50

0.75

Bulkhead Feedthru 75 Ohm

UG 57B

M 55339/05-000057

1.60

0.78

Male-Male

UG 107B

-

1.74

1.48

“T” 2 Female-1 Male

Terminations and Caps

Product Category Nemal P/N Dimensions (IN) Notes

Cap and Chain

NE 7410

0.95

0.75

Fits Plugs

Cap and Chain

NE 7420

0.55

0.75

Fits Jacks

Termination

TR 50N

1.49

0.78

50 Ohm, 1/2 W

Termination

TR 75N

1.49

0.78

75 Ohm, 1/2 W

Termination

TR 50NF

1.38

0.64

50 Ohm-Female